Text Box: Product Detail

Now you can have the industry’s most advanced tread building system and still  keep your own extruder. VersaBuilder® not only functions with any extruder, but offers the latest innovations in retread technology. You get the precision of a computer-controlled system with simplicity and ease of operation. The net result is that VersaBuilder® not only increases the productivity of your shop, but saves you money.

Product Summary


To contact us:

Phone: 330-253-2525

Fax: 330-253-7022

Toll Free USA: 800-669-2525


Building On Tradition—Challenging The Future



Contact Us

Product List

Spare Parts

Bladder Press

Handles Tough Compounds

The VersaBuilder® offers the Orbidie, the advanced twin roller die that processes your freshly extruded rubber at low temperatures and higher output rates.


The VersaBuilder® can build tires from 10” to 38” in bead diameter—everything from small passenger tires to grader and tractor tires.


Accurate Tread Weight Repeatability

To ensure a more uniform end product from the mold, VersaBuilder® uses the patented Spin Sync system. Spin Sync matches tire and ribbon speeds during the wrap to guarantee weight repeatability.


Precision Tread Building

VersaBuilder® puts precision tread building at your fingertips. A state-of-the-art microprocessor and program controller direct all major functions—like rubber application and profile build-up.


Hundreds of die size profiles can be stored in the system’s memory. A pre-programmed profile is recalled by simply entering an ID number on the built-in keyboard. Multi-pass rubber build-ups can also be programmed and executed automatically.


Rubber is applied in one continuous splice-free strip. When the prescribed tread profile has been reached, rubber application stop automatically.


Except for loading, unloading and ribbon start, VersaBuilder® is fully automatic.


Only VersaBuilder® brings your extruder into the world of advanced retread technology. And only VersaBuilder® does so much to eliminate the chance for human error.


° Electrical

- Std 230 VAC, 60 Hz, 3 Phase, 20 Amp

- Std 380 VAC, 50 Hz, 3 Phase, 12 Amp

- Std 460 VAC, 60 Hz, 3 Phase, 10 Amp

° Pneumatic

- 150 PSIG @ 60 CFM intermittent

- (10 Atms @ 28 liters/sec)



° Maximum tread diameter

- 58” (147.3 cm)

° If centerline supported during hub inflation/deflation

- 65” (165.1 cm)

° Maximum section width

- 22” (55.9 cm)

° Maximum tire and rim weight

- 450 lbs. (205 kg)

° Bead diameter range

- Standard hub 13” - 38” (33.0-96.5 cm)

- Small hub (optional) 10”-20” (25.4-50.8 cm)

° Mounting rims available for above ranges



° Stores and executes over one hundred tread programs.

° Keyboard for program selection from memory.

° Rechargeable battery backup for memory protection.

° Multipass building capability.

° Automatic or manual selector for extruder start.

° Automatic advance of tire to preprogrammed “To Start” position.

° Display of wrap count.

° Automatic return of tire to unload/load position.

° Plug-in type portable computer for program input.